The PD 6500 I is the world's best Archway Gate Metal Detector, featuring improved pinpoint technology and unrivaled discriminating capabilities. The PDi is the walk-through of choice for security professionals all over the world because it is designed for maximum patron throughput without sacrificing safety.

Walk through metal detectors are essential when there is a need to screen a high number of people quickly, which is why they are used at airports. A single Metal Detector Arch is capable of screening up to 60 people per minute. That`s 3,600 per hour.​

Metal detectors create a magnetic field by using a brief pulse of electrical current. The magnetic field will be reflected back to the machine if there are any metal objects present, such as a watch or a belt buckle. The return signal is detected by the machine and a beeping noise is produced to alert the agent.​

High quality archway gate metal detectors are used to detect dangerous metal at airport, hospitals, government agencies and other security areas. This metal detector gate detect metal through pinpoint zone detection. It is impossible to hide metal from this high-quality detector.​

To install the Walk-through Garrett PD6500i Archway Gate Metal Detector, you can follow these steps.
Step 1: Open the package and place the left and right door panel on the ground as shown below.
Step 2: Connect the back beam with the left and right doors with bolts,
as shown below. Do not tight the bolts at this step.
Step 3: Open the host beam cover as shown below.
Step 4: Use the bolt to connect the front beam to the left and right door plate and tighten the left and right-side bolts, as shown below.
Step 5: Install the host on the adjustable metal bracket, the screws and holes on both sides of the adjustable metal bracket can be fixed and adjust the display Angle of the host, as shown below.
Step 6: Pass the host signal line through the beam hole, as shown below.
Step 7: Connect the host to the front beam with bolts, as shown below.
Step 8: Plugs in and tightened the signal wire, as shown below.
Step 9: Cover the beam.
Step 10: Lift the security door and move it to the position. Connect the power cord on the side of the door panel and press the power switch to enter the working state, as shown below.​

Step 1: Connect the power supply
Step 2: Press the OK button to access the interface for entering the password.
Step 3: Enter the correct password and access the program setting menu, which consists of 12 submenus
Step 4: Select Sensitivity on the program setting interface by pressing the up or down arrows and then the OK button. The interface for configuring the sensitivity is shown. You can adjust your required sensitivity.
Step 5: From the alarm setting interface you can adjust the alarm volume, Garrett PD6500i Archway Gate Metal Detector tone and other options.
Step 6: Chose your location from the program setting interface and press the ‘Ok’ button.
Step 7: Select your language and press OK button.
Step 8: On the program setting interface, press the up or down button to select Time and press the OK button.
Step 9: On the program settings interface, use the up or down arrows to pick Zone, then click the OK button. Then, using the up and down arrows, pick the detecting zone mode, and then hit the OK button.
Step 10: On the program setting interface, press the up or down button to select Records and press the OK button.
Thus, using the program interface you adjust anything want. Use up or down arrows to select your desired option.​

Measurement of the Passageway Interior Width 30” (0.76 m), Height 80” (2 m), and Depth 23” (0.58 m).

Walk through Gate Metal Detector can detect small metal objects. Even it can alert operator about a single needle.​

Archway Gate Metal Detectors are highly secured. It is impossible to hide metal from this detector.

You can increase the range of your metal detector by adjusting sensitivity of the detector. You have also access to decrease the range of sensitivity.​

Yes, you can calculate how many persons have entered and exited from the metal detector gate in a month or a specific event and Garrett PD6500i Archway Gate Metal Detector.​

Some companies buy cheap metal detector who have low budget and need limited features and options. If you want high security, you should buy metal detector of well-known brand like Garrett.

Archway metal detector facilitate both options. You can fix it with your floor by floor mounding option. You also can move the gate from one place to another according to your need.​

Pinpoint zone detection is an amazing feature of archway metal detector gate. This enables the system to small object even a needle.​

Having stock or not and comparing to the world market, this products price can be up & down. But right now, USA Made Original Garrett PD6500i Archway Gate Metal Detector Starting Cost is 4,70,000 Taka Price in Bangladesh. If you want to buy, the price can be up & down depending on the feature, specification and other customization.