This Surveillance System is a modern security technology used for under vehicle inspection and scanning. It is commonly used on roadsides, airports, prisons, customs checkpoints, military or military offices, and large public parking lots. This under vehicle camera system uses high-resolution cameras, sensors and other technologies to capture images or videos of the vehicle's underside. It can detect prohibited or dangerous items, task systems, or any suspicious objects. It helps to ensure security and is effective as part of various security systems.

​

The under vehicle scanning system generally works as follows:

Installation and Installation: The system is usually installed on roadsides, security checkpoints or large parking lots. In the case of permanent models, it is placed on the side of the road, and the portable models are easily moved.

Vehicle scanning: When a vehicle drives over the system, specially designed sensors and cameras capture images or video of the vehicle's underside. The system usually works through special pads or platforms installed on the road.

Data processing: Images or videos obtained from cameras and sensors are analyzed by processors. It contains high resolution images, video footage and other information.

Analysis and detection: The software in the system analyzes the received images and videos to identify potentially dangerous or prohibited objects. It uses analytics and algorithms.

Information Display: Scanning results are displayed on the display panel, where security personnel can review them. Suspicious objects found are kept for further investigation.

Data storage: Scanned data is stored in data storage, which can be used for later review or analysis.

This process ensures that any dangerous or prohibited items under the vehicle can be accurately identified, making the safety system effective.​

There are several types of under vehicle surveillance scanner system:

Permanent system: placed on the side of the road, for long-term use.

Portable vehicle surveillance system: Easily portable, for periodic checking.

Multi-function system: vehicle x ray scanning system Integrates with other security systems, such as parking barriers and loop detectors.

The capacity of this systems varies according to different types of vehicles and their sizes. In general, its capacity has the following characteristics:

Load Capacity:

Fixed system: usually can withstand loads from 10 tons to 40 tons, suitable for large and heavy vehicles.

Portable system: Typically portable car scanning machine is 3 ton to 5 ton load capacity, ideal for light vehicles.

Vehicle Size:

Width and length: Most systems are designed according to the width and length of the vehicle chassis. Generally, the vehicle chassis supports up to 4000mm length and 60mm width.

Scanning Capability:

Image and Video Resolution: High resolution cameras are used to capture clear images and videos of the underside of the vehicle. The resolution can usually be 2048p or higher.

Data storage:

Storage Capacity: Storage is usually 500GB or more, which is capable of storing photos and videos for a long time.

This capacity may vary depending on different models and manufacturers, so system specifications should be checked against specific needs.​

The UVSS System is used to ensure proper inspection and safety of the vehicle's underside. It is mainly used to secure airports, prisons, customs checkpoints and large parking areas. The system is capable of detecting dangerous objects, contraband items or potential terrorist elements hidden under the vehicle. This is very effective in reducing security risks, especially at large events or important locations. Detect what's under the car easily and quickly, making security systems more efficient and secure.

​

This vehicle x ray scanning system should be used at various security risk locations. This includes airports, where identification of hazardous items is essential. Prisons, where it is necessary to prevent the entry of secret materials. Customs checkpoints, where it is important to prevent smuggling. Entrances to large public events or exhibitions, where increased security is required. Besides, important government buildings and high-security areas, where this system is essential to reduce terrorist threat. These systems help to quickly and effectively detect dangerous or contraband hidden under the vehicle.​

An under vehicle inspection surveillance is typically made up of the following components:

High Resolution Camera: Used to capture clear pictures or videos of the underside of the vehicle.

Lighting system: Special lighting is used to ensure accurate scanning at night or in low light, such as integrated LED lights.

Sensors: Various types of sensors, such as infrared sensors or loop detectors, are helpful in analyzing the underbody of the vehicle.

Processor and Storage: Advanced processor and hard disk to process and store image and video data.

Display Unit: Monitor or display panel for displaying scanning results.

Control Panel: A control panel or touchscreen to operate and control the system.

Installation Platform: Mounting platform or frame for permanent or portable systems.

Networking hardware: LAN and USB ports for data transfer and communication.

These components combine to form an effective and reliable security system.​​

The lifetime of a vehicle inspection surveillance system generally depends on the type of use and environment. Generally, these systems are capable of remaining operational for 5 to 10 years or more.

Factors Determining Lifetime:

Quality of Materials and Construction: Using high quality materials and technology leads to a longer life of the system.

Maintenance: Regular maintenance and cleaning helps to increase the lifespan.

Environmental Effects: System life may be reduced if used in bad weather or harsh environments.

Usage and Upgrades: Regular servicing and upgrades of the system maintain functionality.

The under vehicle inspection surveillance system is capable of providing a long service life if proper maintenance and usage is ensured.​

This systems usually take very little time to operate. Generally, it starts working during the following periods:

Startup Time: The initial preparation and testing time required after the system is turned on usually takes 5-10 minutes.

Scanning time: Scanning the underside of the vehicle usually takes 30 seconds to 2 minutes, depending on the size of the vehicle and the performance of the system.

Processing and Analysis Time: Data processing and analysis usually takes 1–3 minutes after scanning.

In total, the entire scanning and analysis process per vehicle is completed in about 3–5 minutes. System preparation and scanning can be quick and efficient, reducing security checking time.​

The following steps are generally followed to operate an vehicle inspection surveillance system:

System Preparation:

Installation: The system is properly installed and connected. For permanent systems it is placed on the roadside or fixed location. Setup for portable systems.

Power On: The system is powered on by turning on the power switch of the system.

System Configuration:

Configuring settings: Scanning, lighting, and other options are configured. This includes camera angle, resolution, and sensor sensitivity.

Scanning process:

Car Process: Car continues through system scanning area (eg seconds).

Start scanning: The system automatically starts scanning when the vehicle passes at a set speed (eg 30 km/h).

Data Analysis:

Data Processing: The software or hardware in the system is used to analyze the images or videos obtained after scanning.

Showing results: Scanning results are shown on the display unit, so that the operator can quickly identify any problems.

Maintenance and Updates:

Maintenance: Regular cleaning and maintenance of the system is done.

Updates: Software and firmware are updated to maintain system functionality.

By following these steps, the under vehicle inspection surveillance system can be operated properly and the safety program can be successfully completed.​

Sizes of under vehicle monitoring systems vary by model and need. In general, the size of this system can be divided into the following components:

Permanent System:

Width: Typically 3 to 5 meters (10–16 feet) wide, which is enough to scan the underside of a wide variety of vehicles.

Length: About 5 to 10 meters (16-32 feet) or more, so that the vehicle can be fully scanned.

Height: 20-30 cm (8-12 inches) on average, to fit properly under the vehicle.

Portable System:

Width: Usually short and compact, about 1 to 2 meters (3-6 feet) wide.

Length: About 2 to 4 meters (6-13 feet), designed for easy transport.

Height: Can be 10–20 cm (4–8 in) or less, enabling easy mobile transport.

Display and Control Unit:

Monitor: 22 inch or more LCD/LED display is used.

Control panels: usually table-top or rack-mounted panels, which can be 30–50 cm (12–20 in) deep.

Installation and Platform:

Platform: Mounting platforms for permanent systems are usually installed in locations such as garages. The size of the platform is usually customized according to the size and needs of the garage.

This size variation varies the design of the systems to suit different vehicle sizes and usage needs.​

This Surveillance Systems are mainly manufactured in China, USA, Germany, UK, and South Korea.

It is possible to manufacture this product in Bangladesh, but it requires advanced technology, raw materials, and technical skills. It can be implemented through investment.

The under vehicle cctv camera system has some special advantages that play it a special role in the safety system:

Various Vehicle Scans: Accurately scans the underside of the vehicle, which helps pinpoint terrorist materials, weapons or contraband.

High-resolution imaging: Captures clear images and videos using high-definition cameras and lighting technology, enabling detailed analysis.

Automatic Detection: Automatically detects and analyzes the undercarriage, ensuring safety quickly and effectively.

Multi-layer scanning: Using multiple scanning layers can collect different levels of information, which makes the system more reliable.

Ease of Maintenance: Some models are portable and easy to set up, which can be quickly changed or used in different locations.

Data Storage and Analysis: Facilitates the storage and subsequent analysis of acquired data, which aids in long-term security monitoring and reporting.

With these advantages, the under vehicle cctv camera system makes safety checking more efficient and reliable.​

Having stock or not and comparing to the world market, this products price can be up & down. But right now, The Under Vehicle Inspection Surveillance System Starting Price is 5,50,000 Taka Price in Bangladesh. If you want to buy, the price can be up & down depending on the feature, specification and other customization.​