Wheel stopper is one kind of barrier of a parking area which prevents a car from moving forward into the next parking space. It works as a boundary for a vehicle while parking. It is suitable for any kind of parking area to avoid unnecessary collisions.

Wheel stopper is used to stop a car to move forward over it. It is often seen that the body of a car is damaged by the contact of wall in parking space and hence wall is damaged too. It makes a great loss for both the owner of car and parking area. Even sometimes pedestrians cannot avoid accidents while passing a walkway by a car parking roadside. Besides, a car often falls in accident for rolling backwards on a slope in uneven roads. Rubber car stopper can ensure safe parking in any area to protect car and surroundings from damage.

There are many advantages to use it. Its body is so strong that it can load a huge amount of pressure of car without any crack. It is clearly visible in the dark for its yellow reflective stripe. It is extremely weatherproof and UV light, oil and moisture resistant. For being small in size and light-weight, it occupies a very little amount of space in parking area. So, it can be easily carried from one place to another place if necessary. One person is enough to install or remove it. So, it is highly cost effective.

It is a standard size product which size is: length 23-inch, width 6 inch and height 3.75 inch. For being small in size, it can easily block small vehicles like private car, SUV, mini truck, bike, cycle etc. In case of large vehicle like bus or truck, wheel chock block can be used to block the vehicle.

There is no warranty of this product. But generally, it can be used more than 20 years if conditions are applied perfectly.

Its installation is very easy. Before installation we have to make sure that the place is not wet. Then we have to follow some steps that are given bellow:

Step 1: To mark the position where it will be installed.

Step 2: To unbox the rubber wheel blocker and put it in the marked position.

Step 3: To drill the surface towards two end holes of wheel blocker by drill machine.

Step 4: To clean the dust from the holes

Step 5: To set the royal bolts into the holes tightly by hammer

Thus the installation will be done perfectly.

Yes, it can be installed in uneven road. It is highly efficient to use a wheel stopper in uneven road so that cars avoid accidents for rolling backwards on a slope.

Though this wheel stopper is small in size, its load capacity is extremely high because of its best quality body material. It can load maximum 120 ton weight capacity of a car. So it can be used in number of parking places in Bangladesh where small vehicles like private car, mini bus, bike, auto-rickshaw etc. are parked.

Yes, it is possible for a car to go up on the wheel stopper if the size of wheel of that car is large. It means large vehicles like bus or truck can go up on this stopper. But large wheel cannot crack it because its maximum load capacity is 120 ton.

It depends on its load capacity and size of the wheel of a car. It may crack if a vehicle of large wheel and more than 120 ton weight goes up on it.

As it is made of durable rubber, it can be used for many years without any damage. Its lifetime is minimum 20 years if nothing unexpected or serious thing happens to it.

Yes, it is possible because this stopper is perfectly removable. At first you have to remove it from one place and then set up to another place. And all these can be performed by just one person.

No, it does not work for large vehicles like bus or truck. It is suitable for small vehicles like private car, mini bus, SUV, bike, auto-rickshaw etc. which have small size wheels and less than 120 ton load capacity. For large vehicles, you have to use chock block in parking.

More than 120 ton load pressure needs to damage this type of stopper. So it is suitable for small vehicles.

As this blocker can load maximum 120 ton capacity, hence small vehicles like private car, mini bus, SUV, bike, auto-rickshaw etc are suitable to use it. These vehicles have small type of wheels which are perfect for this blocker.

Royal bolt is the only accessory that is used in installation. After marking the position and then drilling through the hole of the wheel stopper by electric drill machine, two royal bolts are fixed into those holes tightly by hammer. The set up is very easy and can be performed by just one person.

To block a single car in parking space, only two wheel blocks need to be set up.

No, it is perfectly weatherproof. It cannot be damaged by hot and cold temperature in Bangladesh. Even in rainy season, rain water can neither damage its surface nor fade its color. That’s why it is very user friendly and you can easily use it for at least 20 years.

It depends on the size of the car. Wheel stoppers must be set up according to the distance between two wheels. For example, the minimum distance of two stoppers for private car is 21.65 inch (550 mm). One thing must be ensured that each of two wheels is set at the middle of each stopper.

No, it is not possible. This rubber stopper does not damage car’s wheel because its body material is very suitable for car contact.

No, it does not hamper the wheel of a car. Because, only royal bolts are used in which do not make any contact with the wheel of a car. Hence there is no chance to damage anything.

Having stock or not and comparing to the world market, this products price can be up & down. But right now, Car parking wheel Stopper Starting Cost is 2500 Taka Price in Bangladesh. If you want to buy, the price can be up & down depending on the feature, specification and other customization.​